Nortel 1000 Features And Services Fundamentals page 241

Prompt Response
STAL (NO) YES
- DFLN 5-MXLN
DES (NO) YES
RESN (NO) YES
- CFWD aaaa (F)
- CFNA aaaa (N)
- HUNT aaaa (B)
- PKUP aaaa (P)
- XFER xxxx (T)
- AAA aaaa (A)
LD 95 - Add names to the CPND data block.
Prompt Response
REQ NEW
TYPE NAME
LANG (ROM) KAT <CR> Store the name in Roman or Katakana. <CR> stores the name
xx
CUST
DIG 0-2045 0-99
<CR>
- NAME aaaa bbbb
xx
- XPLN
<CR>
xxx...x
DN
- NAME aaaa bbbb
Copyright © 1994–2008, Nortel Networks
.
Description
Static allocation of name storage. Must be YES if Background
Terminal is equipped, or whenever name strings change
frequently.
Average default character string length. Suggested default is 13
or the maximum length given to MXLN, whichever is less.
Prompted if STAL = YES.
(Do not) allow designator for MADNs.
(Do not) allow display of reason for redirecting calls.
Mnemonic for Call Forward All Calls display.
Mnemonic for Call Forward No Answer display.
Mnemonic for Hunt/Call Forward Busy display.
Mnemonic for Call Pickup display.
Mnemonic for Call Transfer display for NCRD.
Mnemonic for Attendant Alternative Answering.
Description
Open CPND data block to add new entries.
Create a new name string.
in English.
Customer number, as defined in LD 15
Dial Intercom Group number and member number. Each time
a name string is assigned to a Dial Intercom Group member,
the DIG prompt repeats, until a carriage return is entered to go
to the DN prompt.
Bypass Dial Intercom Group and go to the DN prompt to assign
names on a DN basis.
CPND name string; maximum of 27 characters.
Expected Length.
Range must be between the Input Name length and the MXLN,
or it defaults to DFLN.
Set XPLN to average default character string length (DFLN) or
the actual length (NAME), whichever is longer.
DN to which name string is linked.
CPND name string; maximum of 27 characters.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 241