Nortel 1000 Features And Services Fundamentals page 307

Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
4.
LD 15 - Configure Called Party Control on Internal Calls in the Customer Data Block.
Prompt Response
REQ: CHG
TYPE: FTR
CUST
0-99
0-31
...
- MCDC YES
CPCI YES
LD 57 - Configure Malicious Call Trace Flexible Feature Code.
Prompt Response
REQ CHG
TYPE FFC
CUST xx
CODE MTRC
xxxx
MTRC
Copyright © 1994–2008, Nortel Networks
.
"LD 15 - Configure Called Party Control on Internal Calls in the
Customer Data Block." (page 307)
Configure Called Party Control on Internal Calls in the Customer Data
Block.
"LD 57 - Configure Malicious Call Trace Flexible Feature Code." (page
307)
Configure Malicious Call Trace Flexible Feature Code.
"LD 10 - Enable Malicious Call Trace on Analog (500/2500 type) sets."
(page 308)
Enable Malicious Call Trace on Analog (500/2500 type) sets.
"LD 11 - Enable Malicious Call Trace on Meridian 1 proprietary sets."
(page 308)
Enable Malicious Call Trace on Meridian 1 proprietary sets.
Description
Change existing data.
Change Features and options.
Customer number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
Malicious Call DN/CLID printing allowed.
Called Party Control on Internal Calls allowed.
NO = Called Party Control on Internal Calls denied.
Description
Change existing data.
Flexible Feature Code data block.
Customer number, as defined in LD 15
Malicious Call Trace Flexible Feature Code.
Enter Flexible Feature Code.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 307