Nortel 1000 Features And Services Fundamentals page 125

Trunk Barring
If an Originating Trunk Connection is forwarded to a barred route, it receives
the intercept treatment specified in the Customer Data Block.
Feature packaging
Call Forward by Call Type is included in base system software.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
4.
LD 15 - Enable Call Forward by Call Type for a customer.
Prompt Response
REQ: CHG
TYPE: RDR
CUST
0-99
0-31
- FNAD (HNT)
ATT
NO
FDN
- FNAT (HNT)
ATT
NO
FDN
Copyright © 1994–2008, Nortel Networks
.
"LD 15 - Enable Call Forward by Call Type for a customer." (page 125)
Enable Call Forward by Call Type for a customer.
"LD 16 - Define a trunk route as internal or external for Call Forward
by Call Type." (page 126)
Define a trunk route as internal or external for Call Forward by Call Type.
"LD 10 - Enable Call Forward by Call Type for analog (500/2500 type)
telephones." (page 126)
Enable Call Forward by Call Type for analog (500/2500 type) telephones.
"LD 11 - Enable Call Forward by Call Type for Meridian 1 proprietary
telephones." (page 126)
Enable Call Forward by Call Type for Meridian 1 proprietary telephones.
Description
Change existing data.
Call Redirection
Customer number
Range for Large System and CS 1000E system.
Range for Small System Media
Gateway 1000B.
Treatment for incoming DID calls.
Treatment for incoming external calls.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 125