Nortel 1000 Features And Services Fundamentals page 238

238 Call Party Name Display
End-to-End Signaling
When entered after a call is answered, EES digits are displayed immediately
following the CPND name of the connected party. Leading DN digits and
name characters may be shifted out of the display window.
ISDN
On incoming ISDN calls, the Calling Line ID number can be displayed
instead of a DN on the source party line. CPND applies to telephones
configured for ISDN when redirection is supported. CPND allows calls to
redirect across a network with Network Call Redirection. The CPND is
maintained through the redirection.
ISDN QSIG Name Display
Call Party Name Display and Calling Party Name Display Denied
interact with ISDN QSIG Name Display, depending on the Name Display
configuration in LD 16 for BRI or LD 17 for PRI. When a QSIG network is
interacting with an MCDN network providing network capability ND3, both
the MCDN and QSIG Name Display feature function on the same level.
Listed Directory Number
CPND is not supported for LDNs. If the LDN is an incoming trunk route, the
CPND assigned to the route access code is displayed.
Manual Signaling (Buzz)
If the Signal key is pressed to buzz another telephone, no digit or name
display appears on the telephone.
Meridian Hospitality Voice Services
The maximum length of a CPND name sent from the PMSI/Background
Terminal (BGD) is 27 characters. When the full 27 character length is used,
part of the CPND name may scroll off the screen. To avoid this problem, the
PMSI/Background Terminal (BGD) software has been updated to strip from
the screen all trailing blanks from the CPND name.
Meridian Mail Voice Mailbox Administration
There is significant interaction between the Meridian 1 Call Party Name
Display (CPND) database and the Meridian Mail VMB database. These
interactions are further described in the "Meridian Mail Voice Mailbox
Administration" description in Features and Services Fundamentals
(NN43001-106), Book 2.
Meridian 911
The Call Party Name Display feature can be used to configure and display
the incoming 911 route name.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008