Nortel 1000 Features And Services Fundamentals page 591

Feature
Ring Again
Activate—screen 2
Cancel Ring Again
Conference
(available from the
Established (Active)
call state)
Transfer
Speed Call
Callers
Redial
Copyright © 1994–2008, Nortel Networks
.
Action
After the busy party is free, the IP
Phone sends a short alerting tone.
Press the >RingAgn soft key to
cancel and return to the idle state.
Press the Conf soft key.
Press the Trans soft key.
From the dial tone state, press the
SpcUsr soft key.
Note: How this key is configured in
LD 11 determines whether you see
SpcUsr or SpdCtl.
Press the Callers soft key from
the idle screen state. Press the up
or down arrow on the telephone
dialpad.
Press the Redial soft key from
the idle screen state. Press the up
or down arrow on the telephone
dialpad.
Note: The IP Phone must be registered on the Signaling Server with the
Personal Directory (PD) server enabled for the Callers and Redial soft
key features to be available. The function of the Callers and Redial list
views are controlled by the PD server which can be configured in LD 117.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Using call features 591
Display
Ring again ready,
Select a line RING AGAIN
>RingAg Forward Callers
Redial
Forward Callers Redial
The conference transfer dial tone
screen appears:
Layer 1: >Conf SpcUsr Pickup
More...
Layer 2: Charge CParty
More...
Enter a number. After the call is
answered, press the >Conf soft key.
The transfer number editing state
screen appears:
Layer 1: Trans SpcUsr Pickup
More...
Layer 2: Charge CParty
More...
Enter a number and press the
>Trans key for the telephone to
return to the idle state screen.
Press the SpcUsr soft key. Enter
the speed call code. The telephone
advances to the ringing state.
Dial Edit Copy Del appears on
the screen
Dial Edit Copy Del appears on
the screen