Nortel 1000 Features And Services Fundamentals page 271

Prompt Response
- - CRT2 SH SM EH EM
- - CRT3 SH SM EH EM
LD 10 - Configure Terminal Number Block for analog (500/2500 type) telephones.
Prompt Response
REQ: NEW CHG
500
TYPE:
...
CLS RTDA
...
ARTO (0)-3
xxxx yyyy
FTR
AFD
AHNT
AEFD
AEHT
Copyright © 1994–2008, Nortel Networks
.
Description
Alternate time option 2, where: SH = start time in hours, SM =
start time in minutes, EH = end time in hours and EM = end
time in minutes in international time format (hour from 00-23
and minute 00-59).
Enter "X" to remove current value and reset both the start time
and end time equal to 0.
Alternate time option 3, where: SH = start time in hours, SM =
start time in minutes, EH = end time in hours and EM = end
time in minutes in international time format (hour from 00-23
and minute 00-59).
Enter "X" to remove current value and reset both the start time
and end time equal to 0.
Description
Analog telephone can be defined or modified.
Analog (500/2500 type) telephone data block.
Call Redirection by the Time of Day allowed.
If CLS = RTDD (denied) then RTDA, AEFD, AEHT, AFDN,
AHNT is removed and ARTO prompt is reset to 0.
Alternate Redirection Time Option for call redirection defined
in the Customer Data Block. Only prompted if CLS = RTDA.
Default value 0 is entered if request is new. The value is not
changed if request is CHG.
<CR> to enter CLS and ARTO data.
Enter Feature Name and Related Data.
Alternate Call Forward No Answer DN up to 13 digits.
Remove by setting CLS = RTDD.
Alternate Hunt DN up to 13 digits.
Remove by setting CLS = RTDD.
Alternate External Call Forward No Answer DN up to 13 digits.
Remove by setting CLS = CFTD or RTDD.
Alternate External Hunt up to 13 digits.
Remove by setting CLS = CFTD or RTDD.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 271