Nortel 1000 Features And Services Fundamentals page 464

464 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response
TN
l s c u
c u
xx
CUST
... ...
KEY xx AAA yyyy...
ccc
- MARP (NO) YES
aaaa
- CPND
aaaa
- VMB
- ANIE (0)-N
LD 11 - Configure the CAC for CIS and MFC signaling for digital sets.
Prompt Response
REQ: NEW
CHG
Copyright © 1994–2008, Nortel Networks
.
Description
Terminal number
Format for Large System and CS 1000E system, where l = loop,
s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Customer number, as defined in LD 15
...
xx = key number.
AAA = Key Function.
yyyy = DN or other data related to key function.
ccc = CLID entry.
Deny/Allow Multi Appearance Redirection Prime.
Calling Party Name Display.
Voice Mailbox.
ANI Entry:
It is of (0)-N where N=S_SIZE in customer data block.
If ANIE=0, no entry is associated with the DN key. The old
mechanism is used for building the ANI message.
If ANIE is of 1-N:.
•
If ANIC=YES for the outgoing CIS route where the call
takes place, then the components of the ANI message are
retrieved from the ANI entry in Customer Data Block, if
configured.
• If the given ANI Entry is not configured, or if ANIC=NO for
the outgoing CIS route where the call takes place, then the
old mechanism is used for building the ANI message.
Description
Add new data.
Change existing data.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008