Nortel 1000 Features And Services Fundamentals page 467

Prompt Response
TYPE: ANI
.... ...
xx...x
ANLD
CIS_ANI (NO) YES
... ...
- R_ SIZE (1)-512
aa
- R_ENTRY
Xaa
Xaa Xbb
<CR>
- - DNLG 0-(4)-15
- - LEC 0-99..99
X
- - ADDG 0-(8)-99...99
0-99...99
- - ANDN
X
CACC (NO) YES
Copyright © 1994–2008, Nortel Networks
.
Description
Automatic Number Identification
....
ANI Listed Directory Number. Only included here for clarification
if this prompt appears. Only applies to North American ANI.
Deny/Allow configuration of ANI entries for CIS ANI message.
Maximum number of ANI entries that can be configured for
incoming routes.
This maximum number is limited to 512 as it is the maximum
number of routes. Entries must be empty to decrease R_SIZE.
ANI entry for an incoming route to be created or modified.
ANI entry for an incoming route to be deleted.
ANI entries for an incoming route between aa and bb to be
deleted.
Exit.
R_ENTRY is repeated until <CR> is entered. ANI entries must
be between 0 and (R_SIZE-1). For REQ=NEW, only default
table 0 is configurable. An R_ENTRY can be deleted even if still
assigned on an incoming route.
DN Length
Number of digits of the Calling Line ID (CLID), Originating Line
Identifier (OLI), Calling Number Identification (CNI) to use in the
ANI message, starting with the less significant digits.
Local Exchange Code, 1 to 15 digits.
Remove LEC.
Additional digits, 1 to 15 digits. Used to complete ANI Directory
Number (ANDN) if Local Exchange Carrier (LEC)+ANDN is less
than ANSZ digits defined in LD 16.
Used as ANI DN if calling number is not available or DNLG=0.
Up to 15 digits may be entered.
Remove ANDN.
Deny/Allow Calling Party Category Code (CAC) Conversion
table option.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 467