Nortel 1000 Features And Services Fundamentals page 431

Feature operation
Busy Number Redial
To activate Busy Number Redial, a switchhook flash is done, and the BNRA
FFC is dialed. The number to be re-dialed is stored in the set's storage area
for Autodial. Confirmation tone is given if configured.
When the user goes off-hook and does not dial within the number of
seconds configured for the Autodial Delay timer (ADLD) the busy number
is automatically re-dialed. If the DN is idle when retailed, the feature is
deactivated, otherwise it remains available for 20 minutes. The feature
can be deactivated manually by dialing the BNRD FFC, or the Deactivate
Feature FFC. The user again hears confirmation tone. Deactivating the
feature when it is not active will still cause confirmation tone to be heard,
since the feature may have just timed out when going off-hook to dial the
deactivation code.
Customer Call Forward
Customer Call Forward is activated by dialing the CCFA FFC. Confirmation
tone is given if activation is successful. When Customer Call Forward
is activated, the CFWAC feature is activated with the CFW DN set to the
Reply DN.
CCFW is deactivated by dialing the Customer Call Forward Deactivate
FFC, or the Deactivate Feature FFC (it will also be deactivated by the
activation of certain other features, see the Feature interactions section of
this description).
Outgoing Call Barring
Outgoing Call Barring can be activated from a set with OCBA Class of
Service. To activate OCB, the subscriber dials the OCBA FFC, the barring
level desired, and the Station Control Password. An octothorpe must also
be dialed from Meridian 1 proprietary telephones and analog (500/2500
type) telephones. If activation is successful confirmation tone is given. If
the feature is not activated overflow tone is given.
The feature is deactivated by dialing the OCBD FFC, then the active level,
and the Station Control Password. An octothorpe must also be dialed from
Meridian 1 proprietary telephones and analog (500/2500 type) telephones.
The subscriber may dial the OCBV FFC to verify that OCB is active.
Confirmation tone is heard if OCB is active, otherwise overflow tone is heard.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature operation 431