Nortel 1000 Features And Services Fundamentals page 390

390 Charge Account and Calling Party Number
Override
When Charge Account is used during active Override, some digits may be
lost. When entered with Override in conference, a Charge Account number
is accepted and no digits are lost.
Ring Again
When Ring Again is activated, no charge record is generated, but the
information is stored for future use. If Ring Again is canceled before a
trunk is seized, the charge number is deleted and no record is produced.
If a trunk is seized later by Ring Again, the charge record is generated in
the usual manner. The use of Ring Again with Charge Account ties up
system resources because an auxiliary call register must be maintained in
the Ring Again queue.
Speed Call
Charge account numbers, including the Charge Account access Special
Prefix (SPRE) code, can be stored as Speed Call or Autodial numbers. All
current limitations of these features apply, such as a maximum of 23 digits
per entry, including the access code. An Autodial number or dialed digits
can follow, but not precede, a Speed Call number. The digits generated by
an Autodial key during feature operation are accepted as Charge Account
digits.
Telephone keys
A Charge Account entry is aborted with any of the following keys:
•
•
•
•
•
•
•
•
•
•
•
Feature packaging
CDR with Charge Account (CHG) package 23 requires:
•
Copyright © 1994–2008, Nortel Networks
.
DN
Page
Voice Call
In-Calls
Call Waiting
Call Pickup
Release
Not Ready
a loop key
Release Destination, and
Release Source.
Call Detail Recording (CDR) package 4
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008