Nortel 1000 Features And Services Fundamentals page 520

520 CLASS: Calling Number and Name Delivery
Prompt Response
aaaa
- ENTRY
Xaaaa
Xaaaa Xbbbb
<CR>
...
- LSC 0-9999999
X
- - CLASS_F (DN)
MT LCL
NTN
ENTRY aaaa SAVED
ENTRY aaaa DELETED
ENTRIES aaaa-bbbb DELETED
...
You may print the CLASS_FMT information included in the CLID using LD
21.
You may print or count the station sets class of service using LD 81. This
information would typically be used for billing purposes, to bill set users for
calls according to the assigned class of service.
LD 10 - Configure the CLASS Calling Name and Calling Number Delivery Class of Service for
Analog (500/2500 type) sets.
Prompt Response
REQ: CHG
TYPE: 500
TN
l s c u
c u
Copyright © 1994–2008, Nortel Networks
.
Description
aaaa = CLID entry to be configured.
Xaaaa = CLID entry to be deleted.
Xaaaa Xbbbb = CLID entries to be deleted.
aaaa and bbbb must be a value between 0 and (SIZE-1).
The action for the entry is saved to system memory after the
CLID entry has been completely configured. If an existing
CLID entry is changed, the message "ENTRY aaaa SAVED" is
displayed. If a CLID entry or CLID entries is/are deleted, the
message "ENTRY aaaa DELETED" or "ENTRIES aaaa-bbbb
DELETED" is displayed.
Local steering code, 1-7 digits.
X = delete digits.
Send internal DN to a CLASS set as the calling number.
Send local number to a CLASS set as the calling number.
Send National Number to a CLASS set as the calling number.
Displayed message. Refer to the ENTRY prompt description.
Description
Change existing data.
Telephone type.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008