Nortel 1000 Features And Services Fundamentals page 209

Call Hold, Permanent
Contents
This section contains information on the following topics:
"Feature description" (page 209)
"Operating parameters" (page 209)
"Feature interactions" (page 210)
"Feature packaging" (page 211)
"Feature implementation" (page 212)
"Feature operation" (page 212)
Feature description
Permanent Hold holds an active call on a 2500 telephone without attendant
assistance. Calls cannot be originated or received while in the Permanent
Hold mode. Incoming calls receive a busy signal if Hunting is not defined for
the called telephone.
If the telephone user goes on-hook after activating Permanent Hold, the
telephone periodically receives a one-second ring burst as a reminder that
the call is on hold. This interval is defined at the customer level.
Operating parameters
Permanent Hold is allowed only when a call is active, and if the Class
of Service allows transfer.
If Busy Verify is attempted on a telephone with a call on Permanent Hold,
busy tone is received.
Override cannot be used on a telephone with a call on Permanent Hold.
Permanent Hold cannot be activated during a Conference call.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
209