Nortel 1000 Features And Services Fundamentals page 130

130 Call Forward Destination Deactivation
Figure 1
Call Forward Destination Deactivation Capability
Operating parameters
The feature is applicable to all systems.
Call Forward Destination Deactivation is only supported on Call Forward.
This feature is not supported on Internal Call Forward.
The existing Call Forward All Calls features allows users to program a
call forward station within a system switch or Public Switching Telephone
Network. The Call Forward Destination Deactivation feature is designed for
stand alone application only. Therefore, both the destination and originator
must belong to the same customer on the system.
The call forwarded destination can deactivate the Call Forward All Calls
functionality. However, the call forwarded destination cannot activate the
call forward functionality from the originating telephone unless using the
RCFA FFC.
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008