Nortel 1000 Features And Services Fundamentals page 442

442 China - Toll Call Loss Plan
Prompt Response
TYPE SSL
SSL 1-15
0
SSDG
- TOLL YES
...
00
SSDG
- TOLL N YES
...
SSDG <CR>
LD 16 - Enter the SSL number (defined in LD 18) in the Route Data Block of the DTI2 trunk.
Prompt Response
REQ NEW CHG
TYPE RDB
...
1-15
SSL
LD 73 - Enter the pad codes for a toll call on DTI2.
Prompt Response
REQ NEW CHG PRT
TYPE DTI2
FEAT PAD
PDCA 1-16
TNLS (NO) YES
DFLT (1)-16
...
TOLT Rx Tx
(0) (0)
TOLL Rx Tx
(16) (30)
Copyright © 1994–2008, Nortel Networks
.
Description
Special Service List.
Enter Special Service List number.
China national toll call.
The SSDG entry is a toll number.
China international toll call.
The SSDG entry is a toll number.
End entry.
Description
Add, or change.
Route Data Block
Enter the SSL number defined in LD 18.
Description
Add, change, or print.
2.0 Mbps DTI data block.
Pad category.
Pad category table.
Terminal Number list.
Default table.
Toll call pad data on DTI2 card, where:
Rx = Receive, and
Tx = Transmit.
The default values are 0 dB receive, and 0 dB transmit.
Toll call pad data on line card, where:
Rx = Receive, and
Tx = Transmit.
The default values are 0 dB receive, and 7 dB transmit.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008