Nortel 1000 Features And Services Fundamentals page 250

250 Call Pickup
Multi-Party Operations
Analog (500/2500 type) telephones with PUA and TSA Class of Service can
pick up a call only if they are not involved in another call. After picking up a
call, the user can form a Consultation connection and dial Programmable
Control Digits as normal.
Network Intercom
Hot Type I calls cannot be picked up. An attempt to pick up a Hot Type I call
results in an overflow tone.
Periodic Pulse Metering
Metered calls transferred or extended from one station and answered at
another station using the Call Pickup feature are charged against the station
where the call is picked up as the controlling party disconnects.
M3900 (Single Site) Virtual Office
The Call Pickup feature is not supported for Virtual Set TNs. A Virtual Set
cannot be a member of a call pickup group since the DPU and GPU keys
cannot be configured.
The RNPG prompt is blocked in LD 11. Dialing a SPRE code for Call Pickup
from a logged in Host Telephone results in overflow tone.
Feature packaging
This feature is included in base system software.
Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
Copyright © 1994–2008, Nortel Networks
.
"LD 15 - Implement CO Trunk Priority in the Customer Data Block."
(page 251)
Implement CO Trunk Priority in the Customer Data Block.
"LD 10 - Define Call Pickup group and Class of Service for analog
(500/2500 type) telephones." (page 251)
Define Call Pickup group and Class of Service for analog (500/2500
type) telephones.
"LD 11 - Define Call Pickup group, Class of Service, and Call Pickup key
for Meridian 1 proprietary t" (page 251)
Define Call Pickup group, Class of Service, and Call Pickup key for
Meridian 1 proprietary telephones.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008