Nortel 1000 Features And Services Fundamentals page 465

Prompt Response
a...a
TYPE:
TN
l s c u
c u
xx
CUST
... ...
CAC_CIS 0-(3)-9
CAC_MFC (0)-10
LD 27 - Configure ANI entry for Basic Rate Interface (BRI) lines.
Prompt Response
REQ NEW
CHG
TYPE TSP
... ...
xxxx
SPID
xxxx ccc
DN
aaaa
- CT
- MCAL 1-(4)-8
- CLIP (YES) NO
- PRES (YES) NO
- ANIE (0)-N
Copyright © 1994–2008, Nortel Networks
.
Description
Telephone type. Type ? for a list of possible responses.
Terminal number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Customer number, as defined in LD 15
CIS ANI Category Code.
MFC CNI Category Code.
Description
Add new data.
Change existing data.
Administer Terminal Service Profile on Digital Subscriber Loop.
...
Service Profile ID.
Directory Number (DN) and Calling Line
Identification (CLID) entry.
xxxx = DN
ccc = CLID
Call Types for DN
aaaa = VCE or DTA.
Maximum Calls allowed per DN
Allow/Deny Calling Line Identification Presentation for incoming
calls.
Allow/Deny Presentation of CLID to far end on outgoing calls.
ANI entry. It is of (0)-N where N=S_SIZE in customer data block.
If ANIE=0, no entry is associated with the DN key. The old
mechanism is used for building the ANI message.
If ANIE is 1-N:
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 465