Nortel 1000 Features And Services Fundamentals page 606

606 Controlled Class of Service, Enhanced
3
4
5
To deactivate Enhanced Controlled Class of Service (ECCS), follow these
steps:
Step
1
2
3
4
Copyright © 1994–2008, Nortel Networks
.
Note that this is a toggle: If CCOS is already active, pressing the key
will change the CCOS state to inactive. Check the CCOS lamp to
determine if CCOS is already active.
Dial the PDN of the telephone to be changed and press CCOS. The
console's display shows the DN of the changed telephone. A 0 (zero)
is displayed if the telephone is active in the original CCOS mode.
If the telephone does not have CCOS or ECCS active, the console
does not acknowledge that you have successfully entered a valid
CCOS DN.
To select ECC1, dial # 1.
Note that the octothorpe (#) is required. The console's display shows
the DN of the changed telephone and a 1.
To select ECC2, dial # 2.
Note that the octothorpe (#) is required. The console's display shows
the DN of the changed telephone and a 2.
Press Rls.
Action
Select an idle loop key.
Press CCOS.
Dial the PDN of the telephone to be returned to its original Class of
Service and press CCOS.
Press Rls.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
—End—
—End—