Nortel 1000 Features And Services Fundamentals page 363

LD 11 - Configure Meridian 1 proprietary telephones for Forced Camp-On.
Prompt Response
REQ: NEW
CHG
a...a
TYPE:
TN
l s c u
c u
CLS (CPFA) CPFD
(CPTA) CPTD
WTA
...
KEY xx EOVR
LD 14 - Configure trunks for Forced Camp-On.
Prompt Response
REQ NEW
CHG
...
CLS WTA
Feature operation
Forced Camp-On can be used when making either a simple or consultation
call (that is, having a call on hold while calling another party). The following
feature operation descriptions use telephone A (an analog (500/2500 type)
telephone) or telephone E (a Meridian 1 proprietary telephone) to call
telephone B, which is connected to party C.
The telephones are configured as follows:
1. Telephone A is an analog (500/2500 type) telephone with Warning Tone
2. Telephone B has Warning Tone Allowed (WTA) Class of Service.
Copyright © 1994–2008, Nortel Networks
.
Description
Add new data.
Change existing data.
Telephone type. Type ? for a list of possible responses.
Terminal Number
Format for Large System and CS 1000E system,
where l = loop, s = shelf, c = card, u = unit.
Format for Small System and Media Gateway 1000B where c =
card and u = unit.
Forced Camp-On from another telephone to this telephone
(Allowed) Denied.
Forced Camp-On to another telephone from this telephone
(Allowed) Denied.
Warning Tone Allowed.
Add an Enhanced Override key, where;
xx = the key number (allowed to be programmed only if Priority
Override package 186 is equipped).
Description
Add new data.
Change existing data.
Warning Tone Allowed.
Allowed (WTA) Class of Service.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature operation 363