Nortel 1000 Features And Services Fundamentals page 484

484 CIS ANI Reception
Prompt Response
TYPE RDB
TKTP DID
... ...
DTRK YES
- DGTP DTI2
... ...
ICOG ICT
... ...
CNTL YES
TIMR ARD
512-(1024)-2048
TIMR ATO
2048-(2560)-5120
CISR YES
- CACD
(NO)
BEF
AFT
- CACC
(NO)
BEF
AFT
- AANI
Copyright © 1994–2008, Nortel Networks
.
Description
Route Data Block.
Direct Inward Dial.
...
Digital Trunk Route
Digital Trunk Type
...
Incoming Trunk.
...
Allows change to controls or timers.
ANI Request Duration timer, defines duration of the ANI request
signal. The timer is stored as increments of the 256 ms.
ANI Timeout timer. Defines how long the system waits for the
ANI information from the CIS CO. If timer expires before the ANI
is uploaded from the CDTI2 card, the system treats the call as it
is defined in the ANI Failure Treatment option.
The ATO should be at least twice as large as the ARD.
CIS Route
The option defines how the CAC is displayed on the display of
the set or console. The option also controls presentation of the
CAC in the messages to the auxiliary processors. The options
are:
NO = do not display CAC.
BEF= display CAC before ANI.
AFT= display CAC after ANI.
Defines how CAC is stored in CDR.
NO = do not store CAC
BEF = store CAC before ANI
AFT = store CAC after ANI
The option defines if the Automatic ANI request should be sent
to the CIS CO when the incoming calls are originated from the
CIS CO to the trunks within this route.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008