Nortel 1000 Features And Services Fundamentals page 310

310 Called Party Control on Internal Calls
2. In a three party conference between the called party, calling party and
3. In a set to set call, if the called party establishes a conference with a
Transfer Call
If calling party and the called party are both involved in a simple call
and either party tries to transfer the call to another set then the following
operation is observed:
1. If the called party in a CPCI call attempts to transfer the call to a set with
2. If the called party transfers the call across the network then the called
3. If the calling party in a CPCI call attempts to transfer the call to another
Call on Hold
If calling party and the called party both are involved in a simple call and
either party tries to put the call on hold then the following operation is
observed:
1. If the calling party tries to release the call then the calling party is not
2. If the called party tries to release the call then the called party is allowed
Copyright © 1994–2008, Nortel Networks
.
the recorder then the recorder is not considered as a conferee. The
recorder is treated as a simple call for called party control on internal
calls feature.
trunk then the called party control on internal calls feature functionality is
provided as long as the last called party (with CLS configured as MCTA)
which goes on hook is a set rather than a trunk.
CLS MCTA, it is not allowed to complete its transfer.
party is allowed to complete its transfer across the network and the
transferred to party does not have any control on the calling party.
set, it is not allowed to complete its transfer regardless of that set's
Class of Service.
allowed to release from the call.
to release from the call.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008