Nortel 1000 Features And Services Fundamentals page 403

Charge Display at End of Call
Contents
This section contains information on the following topics:
"Feature description" (page 403)
"Operating parameters" (page 404)
"Feature interactions" (page 404)
"Feature packaging" (page 404)
"Feature implementation" (page 405)
"Feature operation" (page 405)
Feature description
This feature allows the set display of a charged party to show the charged
amount of a metered call, along with the normal call-display information. To
give you time to read and transcribe the charges, the feature maintains this
display for ten seconds after call completion, unless you do something with
the set such as make another call or use another feature.
The currency (for instance, pound sterling, mark, and dollar) displayed is
the currency specified in the feature configuration (LD 15 and LD 16). The
charge information is received from the Central Office (generated from a
Periodic Pulse Metering trunk or an Integrated Services Digital Network
(ISDN) trunk).
This feature is operational in a standalone environment, and is available
on modular digital sets and M2317 sets. For M2317 sets, the charge
information is appended to the standard call-display information. On
modular sets, the charge information is scrolled to the second line (there are
two lines of display on these sets).
Copyright © 1994–2008, Nortel Networks
.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
403