Nortel 1000 Features And Services Fundamentals page 549

Feature implementation
Task summary list
The following is a summary of the tasks in this section:
1.
2.
3.
4.
5.
6.
7.
8.
LD 16 - Enable Collect Call Blocking on a route and configure timers.
Prompt Response
REQ NEW
CHG
TYPE RDB
xx
CUST
ROUT
0-511
0-127
aaa
TKTP
...
Copyright © 1994–2008, Nortel Networks
.
"LD 16 - Enable Collect Call Blocking on a route and configure timers."
(page 549)
Enable Collect Call Blocking on a route and configure timers.
"LD 14 - Setup the firmware timing for XFCOT and EXUT cards." (page
550)
Setup the firmware timing for XFCOT and EXUT cards.
"LD 15 - Allow Collect Call Blocking for attendants." (page 551)
Allow Collect Call Blocking for attendants.
"LD 10 - Enable Collect Call Blocking for analog (500/2500 type)
telephones." (page 551)
Enable Collect Call Blocking for analog (500/2500 type) telephones.
"LD 11 - Enable Collect Call Blocking for Meridian 1 proprietary
telephones." (page 551)
Enable Collect Call Blocking for Meridian 1 proprietary telephones.
"LD 23 - Enable Collect Call Blocking on ACD queues." (page 552)
Enable Collect Call Blocking on ACD queues.
"LD 24 - Enable Collect Call Blocking on DISA blocks." (page 552)
Enable Collect Call Blocking on DISA blocks.
"LD 87 - Enable Collect Call Blocking on CDP Steering codes." (page
552)
Enable Collect Call Blocking on CDP Steering codes.
Description
Add.
Change.
Route Data Block.
Customer number, as defined in LD 15
Route number
Range for Large System and CS 1000E system.
Range for Small System and Media Gateway 1000B.
Trunk type. Must be COT, DID, FEX, or WAT for CCB.
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008
Feature implementation 549