Nortel 1000 Features And Services Fundamentals page 468

468 CIS ANI Digits Manipulation and Gateways Enhancements
Prompt Response
-MFC_ENT <CR>
aa
Xaa
Xaa Xbb
<CR>
-- CAC0 0-(3)-9
-- CAC1 0-(3)-9
-- CAC2 0-(3)-9
-- CAC3 0-(3)-9
-- CAC4 0-(3)-9
-- CAC5 0-(3)-9
-- CAC6 0-(3)-9
-- CAC7 0-(3)-9
-- CAC8 0-(3)-9
-- CAC9 0-(3)-9
-- DFLT 0-(3)-9
Copyright © 1994–2008, Nortel Networks
.
Description
CAC conversion table to convert MFC CAC into CIS CAC
for use on R2MFC routes.
CAC conversion table entry to be created or modified.
CAC conversion table entry to be deleted.
CAC conversion table entries between aa and bb to be
deleted.
Exit MFC CAC conversion table, gives CIS_ENT prompt.
This prompt is repeated until <CR> is entered.
It is prompted if CACC=YES.
CAC conversion table entries must be between 0 and 31.
For REQ=NEW, only default table 0 is configurable.
An ENTRY can be deleted even if still assigned on an incoming
route.
CIS value corresponding to MFC DGT0
CIS value corresponding to MFC DGT1
CIS value corresponding to MFC DGT2
CIS value corresponding to MFC DGT3
CIS value corresponding to MFC DGT4
CIS value corresponding to MFC DGT5
CIS value corresponding to MFC DGT6
CIS value corresponding to MFC DGT7
CIS value corresponding to MFC DGT8
CIS value corresponding to MFC DGT9
CIS value used when MFC CAC has not been received, or MFC
CAC received is not in the MFC CAC list of this table
Nortel Communication Server 1000
Features and Services Fundamentals — Book 2 of 6 (C)
NN43001-106 02.04 Standard
Release 5.5 9 May 2008