Gateway Front Panel Interface - AT&T Syn248 SB35010 Installation And Configuration Manual

Syn248 Installation and Configuration Guide

Gateway Front Panel Interface

You can access basic information and perform some configuration tasks using the
Gateway's front panel. Most of these tasks are easier to do using the WebUI. See
"Accessing the Administrator WebUI" on page
The Gateway displays the Idle screen after completing the power-up sequence. Use the
Gateway main menu to perform some system operations.
To access the Gateway main menu from the Idle screen, as shown in Figure 22, press the
SELECT key.
From the main menu you can access Device Information, Network Status, and the
Configuration menu.
Press the DOWN key to highlight an entry, then press SELECT to see information about
your Gateway or your Network.
On the Device Information screen, you can view:
Model #

Serial #

Boot Version

On the Network Status screen, you can view:
IP Address

Subnet Mask

Default Gateway

DNS Server x

Select Configuration to view or modify some Gateway settings. See
Configuration" on page
Press CANCEL to return to the main menu.
Device Configuration
36.
 30 )(%
3671 /LQHV   
6\QFKURQL]HG
,3  
Figure 22. Gateway Idle Screen
DHYLFH ,QIRUPDWLRQ
NHWZRUN 6WDWXV
Configuration
Figure 23. Gateway Menu Screens
Software Version

Firmware Version.

MAC Address

Network Port

Local Address.

86.
85
Back to Contents
"Gateway