CHAPTER 5
T640 Router Installation Overview
T640 Router Installation Summary
Copyright © 2013, Juniper Networks, Inc.
T640 Router Installation Summary on page 85
It is important to proceed through the installation process in the following order:
Prepare your installation site.
1.
See
"T640 Site Preparation Checklist" on page
Review the safety guidelines.
2.
See
"General Safety Guidelines for Juniper Networks Devices" on page
Unpack the router and verify the parts received.
3.
"Unpacking the T640 Router" on page
Install the mounting hardware.
4.
See
"Installing the T640 Mounting Hardware for a Four-Post Rack or Cabinet" on
page 93
or
"Installing the T640 Mounting Hardware for an Open-Frame Rack" on
page
96.
Install the router.
5.
See
"Mounting the T640 Chassis Using a Mechanical Lift" on page 104
the T640 Chassis in the Rack Manually" on page
Ground the router.
6.
See
"Connecting the T640 Grounding Cable" on page
Connect the router to a management device.
7.
See
"Connecting the T640 Router to a Management Console or Auxiliary Device" on
page
136.
Power on the router.
8.
See
"Powering On a DC-Powered T640 Router" on page
Perform the initial system configuration.
9.
See
"Initially Configuring the T640 Router" on page
81.
87.
120.
133.
162.
171.
383.
or
"Installing
85