T640 Router Installation Overview; T640 Router Installation Summary; Unpacking The T640 Router - Juniper T640 Hardware Manual

CHAPTER 5

T640 Router Installation Overview

T640 Router Installation Summary

Copyright © 2010, Juniper Networks, Inc.
T640 Router Installation Summary on page 69
It is important to proceed through the installation process in the following order:
Prepare your installation site.
1.
See "T640 Site Preparation Checklist" on page 65.
Review the safety guidelines.
2.
See "General Safety Guidelines for M Series, MX Series, and T Series Routers" on
page 303.
Unpack the router and verify the parts received.
3.
"Unpacking the T640 Router" on page 71.
Install the mounting hardware.
4.
See "Installing the T640 Mounting Hardware for a Four-Post Rack or Cabinet" on
page 78 or "Installing the T640 Mounting Hardware for an Open-Frame Rack" on
page 81.
Install the router.
5.
See "Mounting the T640 Chassis Using a Mechanical Lift" on page 89 or "Installing
the T640 Chassis in the Rack Manually" on page 104.
Ground the router.
6.
See "Connecting the T640 Grounding Cable" on page 115.
Connect the router to a management device.
7.
See "Connecting the T640 Router to a Management Console or Auxiliary Device" on
page 119.
Power on the router.
8.
See "Powering On a DC-Powered T640 Router" on page 130.
Perform the initial system configuration.
9.
See "Initially Configuring the T640 Router" on page 139.
69