16.5.4 Naming Your Enforcement Cluster
To name your Enforcement cluster:
Home window>>System configuration>>Enforcement clusters & servers>>Select an Enforcement
cluster
1 In the Cluster name text field, enter a name. Choose a name that describes the cluster,
such as a geographic location (like a street or city name), a building, or your company name.
2 Click ok.
16.5.5 Changing the MS Host Name
To change the MS host name:
See
Section 3.5.2, "Modifying MS Network Settings," on page
16.5.6 Changing the ES Host Name
To change the ES host name:
See
Section 3.4.4, "Changing the ES Network Settings," on page
16.5.7 Changing the MS or ES IP Address
To change the MS or ES IP address:
The preferred method is to use the user interface:
Section 3.5.2, "Modifying MS Network Settings," on page 52
Section 3.4.4, "Changing the ES Network Settings," on page 46
However, if you cannot access the user interface, use the following instructions:
1 Log in to the MS or ES as root using SSH or directly with a keyboard.
2 Enter the following command at the command line:
network-settings.py <ip address> <netmask> <gateway>
Where:
<ip address> is the new IP address for the MS or ES. For example, 192.168.40.10
<netmask> is the netmask. For example, 255.255.255.0
<gateway> is the gateway. For example, 10.1.1.1
16.5.8 Resetting your System
There are times when you may wish to revert to the as-shipped state for your system; reverting the
configuration and database to that of a freshly installed system.
52.
46.
System Administration 335