Adding A Point Of Service Terminal - Novell LINUX ENTERPRISE 11 - SUBSCRIPTION MANAGEMENT TOOL GUIDE 10-02-2009 Manual

5 The script initializes the local branch LDAP database using the ldapadd com-
6 In the offline installation mode, it is not yet possible to find the branch server
7 The script asks for a final confirmation before it configures and starts the core
8 If everything is OK the script finishes successfully. If an error is encountered it
NOTE: Administration and Branch Server Combination
If the administration and branch servers are being configured on a single ma-
chine, no certificates are used and the SSL communication is disabled. Also,
there is no local branch LDAP database created, as the offline functionality is
not needed.
3.3 Adding a Point of Service
The process of adding a Point of Service terminal to SUSE Linux Enterprise Point of
Service system consists of the following steps:
1 The POS machine, connected to the Branch Server, is started. The POS machine
30 SUSE Linux Enterprise Point of Service Guide
mand from the offline installation file.
domain. Therefore, if there is no internet connection, the attempt fails and the
script terminates. However if there is a connection to the Administration Server,
the script finds the branch server domain in the Administration Server LDAP
database and prints information about the found domain.
Branch Server services.
is reported and logged in syslog.
NOTE: Aborting the Script
If you select no in any configuration step (except when you select not
to use a local branch LDAP), the script deletes all its intermediate data
and exits.
Terminal
downloads the booting image.