Installing The Zenworks Handheld Management Access Point On Additional Computers - Novell ZENWORKS HANDELD MANAGEMENT 7 SP1 IR4 Installation Manual

28 (Conditional) If you chose to enable RIM BlackBerry support, type the service user's e-mail
address to be used by the BlackBerry client software, then select the MAPI profile that you
created in Section 2.2.3, "Creating a MAPI Profile (BlackBerry Device Support Only)," on
page 22, then click Finish.
29 Click Finish.
30 On the computer where you installed the ZENworks Handheld Management Server software,
create a Read/Write share to the installation directory.
The default location is
2.3.2 Installing the ZENworks Handheld Management Access
Point on Additional Computers
When you install the ZENworks Handheld Management Server using the installation program, the
ZENworks Handheld Management Access Point is installed on the same computer.
You can install the ZENworks Handheld Management Access Point on additional computers to
distribute the communication load and provide better support for WAN environments. These
machines must be able to communicate to the ZENworks Handheld Management Server through
TCP/IP.
You can also install the ZENworks Handheld Management Access Point on the laptops or desktops
that are usually not connected to the network but are used by Windows CE devices for
synchronization. If you install the ZENworks Handheld Management Access Point on these
computers, the synchronizing Windows CE devices can communicate to the ZENworks Handheld
Management Access Point even when the ZENworks Handheld Management server is not
connected to the network. The communication between the ZENworks Handheld Management
Access Point and the ZENworks Handheld Management Server happens when you connect these
laptops or desktops to the network.
c:\program files\novell\zfh
.
Installing ZENworks Handheld Management 35