Table of Contents
Advertisement
2.4.2
Running Q-Vet
You must run Q-Vet on each partition in the system to verify the
complete system.
Compaq recommends that you review the Special Notices and the Testing Notes
section of the Release Notes located at
before running Q-Vet.
Follow the instructions listed for your operating system to run Q-Vet in each
partition.
Tru64 UNIX
Graphical Interface
Command-Line
Interface
http://chump2.mro.cpqcorp.net/qvet/
1. From the Main Menu, select IVP, Load Script and
select Long IVP (the IVP tests will then load into the
Q-Vet process window).
2. Click the Start All button to begin IVP testing.
> vet -nw
Q-Vet_setup> execute .Ivp.scp
Q-Vet_setup> start
Note that there is a "." in front of the script name, and that
commands are case sensitive.
Troubleshooting 2-15
Advertisement
Table of Contents
Troubleshooting
