Compaq AlphaServer ES45 Service Manual page 166

4.21 sys_exer
The sys_exer command exercises the devices displayed with the show
config command. Tests are run concurrently and in the background.
Nothing is displayed after the initial test startup messages unless an
error occurs.
Example 4–27 sys_exer
P00>>> sys_exer
Default zone extended at the expense of memzone.
Use INIT before booting
Exercising the Memory
Exercising the DK* Disks(read only)
Exercising the DQ* Disks(read only)
Exercising the DF* Disks(read only)
Exercising the Floppy(read only)
Testing the VGA (Alphanumeric Mode only)
Exercising the EWA0 Network
Type "show_status" to display testing progress
Type "cat el" to redisplay recent errors
Type "init" in order to boot the operating system
P00>>> show_status
ID Program
-------- ------------ ------------ ------ --------- ------------- -----------
00000001 idle system
0000125e memtest memory
00001261 memtest memory
00001268 memtest memory
0000126f exer_kid dka0.0.0.2.1
00001270 exer_kid dka100.1.0.2
00001271 exer_kid dka200.2.0.2
00001278 exer_kid dqa0.0.0.15.
00001280 exer_kid dfa0.0.0.2.1
00001281 exer_kid dfb0.0.0.102 1066
0000128e exer_kid dva0.0.0.100
00001381 nettest ewa0.0.0.4.1
P00>>> init
OpenVMS PALcode V1.91-33, Tru64 UNIX PALcode V1.87-27
...
starting console on CPU 0
4-64 ES45 Service Guide
Device Pass Hard/Soft Bytes Written
0 0
12 0
12 0
11 0
0 0
0 0
0 0
0 0
84 0
0
0 0
362 0
Bytes Read
0 0
0 6719275008 6719275008
0 6689914880 6689914880
0 6689914880 6689914880
0 0
0 0
0 0
0 0
0 0
0 0 109256192
0 0
1 1018720
0
8612352
8649728
8649728
3544064
8619520
980992
1018496