Table of Contents
Advertisement
3.3.2
SRM Console Power-Up Display
When SROM power-up is complete, the primary CPU transfers control
to the SRM console program.
The console program continues the
system initialization.
Failures are reported to the console terminal
through the power-up screen and a console event log.
The following section shows the messages that are displayed once the SROM
has transferred control to the SRM console.
Example 3–2 SRM Power-Up Display
OpenVMS PALcode V1.88-28, Tru64 UNIX PALcode V1.83-24
starting console on CPU 0
initialized idle PCB
initializing semaphores
initializing heap
initial heap 240c0
memory low limit = 1e6000
heap = 240c0, 17fc0
initializing driver structures
initializing idle process PID
initializing file system
initializing timer data structures
lowering IPL
CPU 0 speed is 1000 MHz
create dead_eater
create poll
create timer
create powerup
access NVRAM
4096 MB of System Memory
Testing Memory
...
probe I/O subsystem
3-10
ES45 Service Guide
Advertisement
Table of Contents
Troubleshooting
