Table of Contents
Advertisement
Replacing the Floppy Drive
Shut the system down before removing the floppy drive.
1. Remove the cover to the PCI card cage.
2. Unplug the signal cable
floppy.
3. Remove and set aside the four screws
cage.
4. Slide the cage out far enough to gain access to the floppy cables. Unplug the
cables and remove the cage.
5. Remove the cage.
6. Remove the four screws
out.
7. Remove the mounting brackets
floppy.
8-54
ES45 Service Guide
and power cable
from all devices except the
that secure the removable media
that secure the floppy drive, and slide the floppy
(two screws
in each bracket) from the
Advertisement
Table of Contents
Troubleshooting
