Running Diagnostics - Compaq ProLiant 1600 Maintenance And Service Manual

7. Install a loopback plug (Part Number 142054-001), when required by Diagnostics.
8. Run the latest version of Diagnostics.

Running Diagnostics

There are two ways to access the utilities:
From the System Partition.
From diskette. A diskette can be created from the SmartStart CD.
1. Accessing the utilities from the system partition:
2. Reboot the server by pressing the Ctrl+Alt+Delete keys.
Press F10 when the following prompt appears at the top of the screen during POST.
IMPORTANT: The text appears for only two seconds. If you do not press
F10 during this time, you must reboot the server.
3. From the System Configuration Main Menu, select Diagnostics and Utilities.
If there are errors detected in your Server Health Log, the Diagnostics Utility
automatically displays the following screen message:
4. Press the Enter key to continue.
5. After a short pause, the Server Health Log menu displays with a list of system errors. If
there is more than one error, press the Space Bar to select the error you want to correct.
Press Enter.
6. The Diagnostics Utility prompts you and suggests corrective action.
Press "F10" for System Partition Utilities.
CAUTION: Errors have been detected in you Server Health Log. Diags will
now identify your system hardware.
Compaq ProLiant 1600 Servers Maintenance and Service Guide
3-25