Table of Contents
Advertisement
Nettest performs a network test. It can test the ei* or ew* ports in internal
loopback, external loopback, or live network loopback mode.
Nettest contains the basic options to run MOP loopback tests. Many
environment variables can be set from the console to customize nettest before
nettest is started. The environment variables, a brief description, and their
default values are listed in the syntax table in this section. Each variable name
is preceded by e*a0_ or e*b0_ to specify the desired port.
You can change other network driver characteristics by modifying the port
mode. See the -mode option.
Use the show_status display to determine the process ID when terminating an
individual diagnostic test. Use the kill or kill_diags command to terminate
tests.
4-52
ES45 Service Guide
Advertisement
Table of Contents
Troubleshooting
