Web Enterprise Service (Webes) Director - Compaq AlphaServer ES45 Service Manual

5.1.1

WEB Enterprise Service (WEBES) Director

Compaq Analyze uses the functionality contained in the WEBES
Director, a process that manages all other WEBES processes and
executes continuously on the machine when configured to do so. The
Director manages the decomposition processing of system error events,
provides required information to the analysis engine, and performs
notification message routing for the system. Compaq Analyze provides
the functionality for system event analysis and Bit-To-Text (BTT)
translation.
Compaq Analyze, includes common WEBES code. Subsequent releases of
Compaq Analyze will continue to ship with the common WEBES code.
The Director is started when the system is booted. Normally you do not need to
start the Director. If the Director has stopped running, restart it by following
the instructions in the WEBES Compaq Analyze User Guide documentation.
Compaq Analyze includes a graphical user interface (WUI) that allows the user
to interact with the Director. While only one Director process executes on the
machine at any time, many WUI processes can run at the same time, connected
to the single Director. Refer to the Compaq Analyze installation and user
manuals for the respective operating system to launch the Compaq Analyze
WUI. The Compaq service tools Web site available to customers is:
http://www.support.compaq.com/svctools
The applicable Compaq Analyze documentation includes the following:
•
Compaq Analyze User' s Guide
•
Compaq Analyze Installation Guide for Tru64 UNIX
•
Compaq Analyze Installation Guide for OpenVMS
•
Compaq Analyze Releases Notes
5-4 ES45 Service Guide