Table of Contents
Advertisement
6.1.2
Setting the Control Panel Message
You can create a customized message to be displayed on the operator
control panel after startup self-tests and diagnostics have been
completed.
When the operating system is running, the control panel displays the console
revision. It is useful to create a customized message if you have a number of
systems and you want to identify each system by a node name.
You can use the SRM set ocp_text command to change this message (see
Example 6–1). The message can be up to 16 characters and must be entered in
quotation marks.
Example 6–1 set ocp_text
P00>>> set ocp_text "Node Alpha1"
6-4 ES45 Service Guide
Advertisement
Table of Contents
Troubleshooting
