Table of Contents
Advertisement
8.11.1 Replacing the PCI Hot Swap Module
Shut the system down before adding or replacing the PCI hot swap module.
1. Halt all applications and power down the system.
2. Unscrew and remove the three
(Note: make sure you remove the three lower screws that hold the switch
board in place.)
3. Pull the module straight back removing the six tabs in the module
the slots
in the metal.
4. To assemble a new module, reverse the procedure.
M3x 6mm screws and attached washers.
FRU Removal and Replacement
from
8-43
Advertisement
Table of Contents
Troubleshooting
