Table of Contents
Advertisement
Options
Timer. Prints out the run time of the pass. Default = off .
-m
Tests the specified memory address without allocation. Bypasses
-z
all checking but allows testing in addresses outside of the main
memory heap. Also allows unaligned input.
CAUTION: This flag can overwrite the console. If the system
Used only for march test (2). Uses this pattern as test pattern.
-d
Default = 5's
Allocates test memory from the firmware heap.
-h
Used only for random test (3). Uses this data as the random seed
-rs
to vary random data patterns generated. Default = 0.
Randomly allocates and tests all of the specified memory address
-rb
range. Allocations are done of block_size.
Memory barrier flag. Used only in the -f graycode test. When set
-mb
an mb is done after every memory access. This guarantees serial
access to memory.
Used only for block test (4). Uses the data stored at this address to
-ba
write to each block.
4-48
ES45 Service Guide
hangs, press the Reset button.
Advertisement
Table of Contents
Troubleshooting
