Compaq AlphaServer ES45 Service Manual page 206

Table 6–1 SRM Environment Variables (Continued)
Variable
cpu_enabled
ei*0_inet_init or
ew*0_inet_init
ei*0_mode or
ew*0_mode
ei*0_protocols or
ew*0_protocols
6-12 ES45 Service Guide
Attributes Description
NV Enables or disables a specific secondary CPU. All
CPUs are enabled by default. The primary CPU
cannot be disabled. The primary CPU is the
lowest numbered working CPU.
NV Determines whether the interface's internal
Internet database is initialized from nvram or
from a network server (via the bootp protocol).
NV Sets the Ethernet controller to the default
Ethernet device type.
aui—Sets the default device to AUI.
bnc—Sets the default device to ThinWire.
fast—Sets the default device to fast 100BaseT.
fastfd—Sets the default device to fast full duplex
100BaseT.
full—Set the default device to full duplex twisted
pair.
Twisted-pair— Sets the default device to
10BaseT (twisted-pair).
NV Determines which network protocols are enabled
for booting and other functions.
Mop—Sets the network protocol to MOP for
systems using the OpenVMS operating system.
Bootp—Sets the network protocol to bootp for
systems using the Tru64 UNIX operating system.
Bootp,mop—When the settings are used in a
list, the mop protocol is attempted first, followed
by bootp.