Diagnostics; Running Diagnostics - Compaq ProLiant 5000 Reference Manual

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Diagnostics

When you select Diagnostics and Utilities from the System Configuration
Utility main menu, the utility provides prompts to test, inspect, upgrade, and
diagnose the server.
Diagnostics and Utilities are located on the system partition on the hard drive
and must be accessed in the following instances:
When a system configuration error is detected during the Power-On
Self-Test (POST)
To change factory default settings for some of the computer features
To change the system configuration, which is sometimes necessary
when you add or remove optional hardware
To set system configuration features
The following options are available from the Diagnostics and Utilities menu:
Test Computer
Inspect Computer
Upgrade Firmware
Remote Utilities
Diagnose Drive Array

Running Diagnostics

There are two ways to access the utilities:
From the System Partition.
From diskette. A diskette can be created from the SmartStart CD.
Writer: Project: Diagnostic Tools Comments:
File Name: O-ch11.doc Last Saved On: 4/22/97 1:11 PM
Compaq ProLiant 5000 Servers Reference Guide
11-23