Table of Contents
Advertisement
4.4
clear_error
The clear_error command clears errors logged in the FRU EEPROMs as
reported by the show error command.
Example 4–3 clear_error
P00>>> clear_error smb0
P00>>>
P00>>> clear_error all
P00>>>
Clears all errors logged in the FRU EEPROM on the system motherboard
(SMB0).
Clears all errors logged to all FRU EEPROMs in the system.
The clear_error command clears TDD, SDD, and checksum errors. Hardware
failures and unreadable EEPROM errors are not cleared. See Table 4–2.
Syntax
clear_error
<fruname>
clear_error all
See the show error command for information on the types of errors that might
be logged to the FRU EEPROMs.
Clears all errors logged to a specific FRU. Fruname
is the name of the specified FRU. If you do not
specify a FRU, you must use clear_error all to clear
errors.
Clears all errors logged to all system FRUs.
SRM Console Diagnostics 4-11
Advertisement
Table of Contents
Troubleshooting
