6.7.5
Power Supply Configurations
Figure 6–10 Power Supply Locations
Tower
0 0
1 1
2 2
The system can have the following power configurations:
Two Power supply System (minimum configuration)
•
Two CPUs
•
One storage cage
•
Four to sixteen DIMMs
Redundant Power Supply. If a power supply fails, the redundant supply
provides power and the system continues to operate normally. A third power
supply adds redundancy for an entry-level system.
Recommended Installation Order. Generally, power supply 0 is installed
first, power supply 1 second, and power supply 2 third, but the supplies can be
installed in any order. See Figure 6–10. The power supply numbering corre-
sponds to the numbering displayed by the SRM show power command.
Pedestal/Rack
0 0
System Configuration and Setup 6-33
1 1 1
2 2 2
PK0207B