Table of Contents
Advertisement
The fans are hot-plug components. You can replace individual fans while the
system is running.
WARNING: Contact with moving fan can cause
severe injury to fingers. Avoid contact or remove
power prior to access.
WARNING: High current area. Currents exceeding
V @ >240VA
240 VA can cause burns or eye injury. Avoid con-
tact with parts or remove power prior to access.
Replacing Fans
Remove the cover from the fan area (fans
.
,
,
, and
1. Pull the pop-up latch to unlock it, and lift the fan out of the system. Fan
has no pop-up latch. It is held in place by fan
2. Install the new fan, taking care to align it as it slides in. Press the pop-up
latch to lock the fan in place.
3. Replace the cover to the fan area or the PCI card cage.
Verification — RMC
1. Invoke the remote management console.
2. Enter the env command to verify the fan status.
8-24
ES45 Service Guide
and
) or the PCI card cage (fans
.
Advertisement
Table of Contents
Troubleshooting
