Table of Contents
Advertisement
Swap or Pagefile Space
The system must have adequate swap space (on Tru64 UNIX) or pagefile space
(on OpenVMS) for proper Q-Vet operation. You can set this up either before or
after Q-Vet installation.
During initialization, Q-Vet will display a message indicating the minimum
amount of swap/pagefile needed, if it determines that the system does not have
enough. You can then reconfigure the system.
If you wish to address the swap/pagefile size before running Q-Vet, see the
Swap/Pagefile Estimates on the Q-Vet Web site.
2-12 ES45 Service Guide
Advertisement
Table of Contents
Troubleshooting
