6. Release the clips
the DIMM
.
7. Install the DIMM and align the notches on the gold fingers with the connec-
tor keys.
8. Secure the DIMM with the clips
Figure 8–15 Aligning DIMM in MMB
2
1
3
9. Reinstall the MMB.
10. Replace the system card cage cover and enclosure covers.
11. Reconnect the power cords.
Verification
1. Turn on power to the system.
2. During power-up, observe the screen display for memory. The display
shows how much memory is in each array.
3. Issue the show memory command to display the total amount of memory
in the system.
8-36
ES45 Service Guide
(Figure 8–15) on the MMB slot where you will install
on the MMB slot.
1
3
4
PK0953A