Compaq AlphaServer ES45 Service Manual page 108

4.2 buildfru
The buildfru command initializes I
structures for the named FRU and initializes its SDD and TDD error
logs. This command uses data supplied on the command line to build
the FRU descriptor. Buildfru is used by Manufacturing, FRU repair
operations, or Field Service.
Example 4–1 buildfru
P00>>> buildfru smb0.mmb0.J3 54-24941-EA NI90200100
P00>>> buildfru smb0.cpu0 30-30158-05.AX05 NI94060554 Compaq
P00>>> buildfru -s smb0.mmb0.J3 80 45
P00>>> buildfru -s smb0.mmb0.J3 80 47 46 45 44 43 42 41
Building of the FRU descriptor on a DIMM, passing a part number and a
serial number
Building of the FRU descriptor on a CPU, passing a part number, serial
number, and miscellaneous string
Building of the FRU descriptor on a DIMM with the -s qualifier, pass offset
80, and value of 45
Building of the FRU descriptor on a DIMM with the -s qualifier, pass offset
80, and many sequential data bytes
The buildfru command is used for several purposes:
•
By Manufacturing to build a FRU table containing a description of each
FRU in the system
•
By FRU repair operations for initializing good stocking spares
•
By Field Service to make any FRU descriptor adjustments required by the
customer.
4-6 ES45 Service Guide
2
C bus EEPROM descriptive data