Table of Contents
Advertisement
For information about the data displayed by the info commands, see the
following documents:
•
For info 0, info 1, and info 4, see the Alpha System Reference Manual,
Third Edition (EY-W938E-DP), available from Digital Press, an imprint of
Butterworth-Heinemann.
•
For info 2, see the Galaxy Console and Alpha Systems V5.0 FRU
Configuration Tree Specification.
•
For info 3, see the Titan 21274 Chipset Functional Specification.
info 0
Displays the SRM memory descriptors as described in the Alpha System
Reference Manual.
info 1
Displays the page table entries (PTE) used by the console and operating
system to map virtual to physical memory. Valid data is displayed only
after a boot operation.
info 2
Dumps the Galaxy Configuration Tree (GCT) FRU table. Galaxy is a
software architecture that allows multiple instances of OpenVMS to execute
cooperatively on a single computer.
info 3
Dumps the contents of the system control status registers (CSRs) for the
C-chip, D-chip, and P-chips.
info 4
Displays the per CPU impure area in abbreviated form. The console uses
this scratch area to save processor context.
info 5
Displays the per CPU impure area in full form.
info 6
Displays the per CPU machine check logout area.
info 7
Displays the contents of the Console Data Log.
info 8
Clears all event frames in the Console Data Log.
For more information on:
•
info 0, 1, 4, and 5 see the Alpha System Reference Manual
•
info 2 see the Galaxy console and Alpha Systems V5.0 FRU configuration
Tree Specification.
•
info 3 see the Titan Chipset Engineering Specification.
•
info 6 and 7 see the AlphaServer ES45 Platform Fault Management
Specification.
4-28
ES45 Service Guide
Advertisement
Table of Contents
Troubleshooting
