Table of Contents
Advertisement
2.4.4
De-Installing Q-Vet
The procedures for de-installation of Q-Vet differ between operating
systems. You must de-install Q-Vet from each partition in the system.
Failure to do so may result in the loss of customer data at a later date if
Q-Vet is misused.
Follow the instructions listed under your operating system to de-install Q-Vet
from a partition. The qvet_uninstall programs will remove the Q-Vet supplied
tools and restore the original system tuning/configuration settings.
Tru64 UNIX
1. Stop, Terminate, and Exit from Q-Vet testing.
2. Execute the command qvet_uninstall. This will also restore the system
configuration/tuning file sysconfigtab.
3. Note: log files are retained in /usr/field/tool_logs
4. Reboot the system. You must reboot in any case, even if Q-Vet is to be
reinstalled.
OpenVMS
1. Stop, Terminate, and Exit from any Q-Vet testing.
2. Execute the command @sys$manager:qvet_uninstall. This will restore
system tuning (modparams.dat) and the original UAF settings.
3. Note: log files are retained in sys$specific:[sysmgr.tool_logs]
4. Reboot the system. You must reboot in any case, even if Q-Vet is to be
reinstalled.
2-18 ES45 Service Guide
Advertisement
Table of Contents
Troubleshooting
