2-56 Compaq ProLiant DL760 Servers Maintenance and Service Guide
Hot-Plug Power Supply and Midplane Assembly
Compaq ProLiant DL760 servers support up to two hot-plug, redundant power supplies.
Hot-Plug Power Supply
The system power in the Compaq ProLiant DL760 server does not have to be shut off to replace
one of the power supplies.
To replace a hot-plug power supply with the system power on:
1. Remove the power cord from the power supply to be replaced and release the power cord
clamp.
Figure 2-51. Removing the power cord
WARNING: To reduce the risk of electric shock or damage to the equipment:
I Install the power supply before connecting the power cord to the power supply.
I Unplug the power cord before removing the power supply from the server.